Omron FQ2-S/CH Series, Руководство пользователя, Страница: 231 / 590

Inspecting with the Search Inspection Item FQ2-S/CH User’s Manual
229
4
Setting Up Inspect
ions
4-18 Calculations and Judgments Using Inspection Item Data : p. 323
Measurement Data That Can Be Logged
The following values can be logged as measurement data.
*When logging data is output, the data is output in the order of the above table.
If more than one item is stored, results are output for each model.
7-6 Logging Measurement Data and Image Data : p. 392
Errors
Errors in Teaching
A teaching error message will appear if the contrast of the image within the model registration region is too low.
Select a region with a larger contrast between light and dark areas compared to the region that was registered
as the model and re-register it as the model.
SX Reference X
−
99,999.9999 to 99,999.9999 This is the X coordinate of the position
where the model was registered.
SY Reference Y − 99,999.9999 to 99,999.9999 This is the Y coordinate of the position
where the model was registered.
ST Reference angle
−
180 to 180 This is the angle when the model was
registered.
RX Detection coordinate X − 99,999.9999 to 99,999.9999 − 99,999.9999 to 99,999.9999
This is the X coordinate of the detection
point when the model was registered.
RY Detection coordinate Y
−
99,999.9999 to 99,999.9999 This is the Y coordinate of the detection
point when the model was registered.
C Count 0 to 32 This is the number of models found.
Parameter Range of value Description
Judgement
0: Judgement is OK
−
1: Judgement is NG
−
13: Teaching not performed error
− 14: Figure not registered error
− 15: Out of range error
This is the measurement judgment results.
Correlation 0 to 100 This is the measured correlation.
Position X -99999.9999 to 99999.9999 This is the measurement position X.
Position Y -99999.9999 to 99999.9999 This is the measurement position Y.
Angle − 180 to 180 This is the measurement angle.
Count 0 to 32 This is the number of models found.
Expression
text string
Data name Description Data range