![background image](http://html1.mh-extra.com/html/omron/fh-sm02/fh-sm02_construction-manual_742865087.webp)
83
6.4.1.
Setting Calibration
Follow the procedures below to set a scene for Calibration.
1
Prepare a calibration target and
locate it as same as the height
of the imaging surface of a
workpiece.
The
target
should
have
sufficient strength not to shift
or deform by operations of the
robot.
The target should have a mark
such as pattern or shape which
the
Shape
Search
III
processing unit can detect.
2
Click [Scene switch] on the
Main Window of the Vision
Sensor.
Select target scenes. The target
scenes are as follows.
Pick:
127
Calibration_Pick_On
-
hand_xx_
xxx
Place:
125
Calibration_Place_On
-
hand_xx
_xxx
Click [OK] to switch scenes.
Calibration
Target
Adjusting
the
height as same as
that
of
the
imaging surface.