76
2
Check that the check box for
“Output” is not checked.
The serial data for the
measurement value is not
output until the Vision Sensor
setting is completed.
Place a check in the check box
when executing a robot sample
program described in Chapter
7.
3
Click [Robot Operation] on the
Main Window of the Vision
Sensor to open the “Robot
Operation” dialog.
With a workpiece ideally
gripped, move the robot to a
position to image (measure)
the workpiece for the Grip
Correction on the “Robot
operation” dialog.
WARNING
These operations drive the robot.
Operate the robot in the state whereby pressing the
[Emergency stop] button can stop its motion anytime.