![background image](http://html1.mh-extra.com/html/omron/ej1-07-2008/ej1-07-2008_operation-manual_743567138.webp)
119
Sending Explicit Messages
Section 6-5
OFF), Communications Power Voltage Monitor Error Flag (bit 01) = 0
(normal), Unit Maintenance Flag (bit 03) = 0 (within range), Temperature
Controller Maintenance Flag (bit 07) = 0 (within range).
Explicit Message Command
Explicit Message Response
• The command data is written in DM words starting from D01000 in the
CPU Unit memory, and the response data is stored in DM words starting
from D02000.
• If the command does not end normally, the end code is stored in DM
words D00006, and the send command is re-executed.
Command Details
[CMND S D C]
Response
6-5
Sending Explicit Messages
The following list shows explicit messages that can be sent to the DeviceNet
Communications Unit. These messages are used to read and write mainte-
nance information (such as Unit conduction time or total RUN time) for the
DeviceNet Communications Unit and Temperature Controllers.
For details on sending explicit messages from an OMRON Master PLC, refer
to the corresponding DeviceNet Master Unit operation manual.
Destination node
address
Service code
Class ID
Instance ID
Attribute ID
09 hex
0E hex
0095 hex
0001 hex
65 hex
No. of bytes received
Source node address
Service code
Data
03 hex
09 hex
8E hex
01 hex
S
0: 2801 hex
Command code
+1: 090E hex
DeviceNet Communications Unit node address
Service code = 0E hex
+2: 0095 hex
Class ID = 0095 hex
+3: 0001 hex
Instance ID = 0001 hex
+4: 6500 hex
Attribute ID = 65 hex
D
D02000:
First response storage word
C
0: 0009 hex
No. of command data bytes
+1: 0009 hex
No. of response data bytes
+2: 0001 hex
Remote (destination) network address = 1
+3: 04FE hex
Remote (destination) node address = 4
Remote (destination) Unit address = FE hex (10 hex
is also possible)
+4: 0000 hex
Response required, communications port No. = 0,
No. of retries = 0 hex
+5: 003C hex
Response monitoring time = 6 s
0: 2801 hex
Command code
+1: 0000 hex
End code (FINS)
+2: 0003 hex
No. of bytes received
+3: 098E hex
Node address = 09 hex, service code = 8E hex
+4: 0100 hex
Node address = 01 hex (rightmost 00 hex is ignored)
Содержание EJ1 - 07-2008
