Omron EJ1 - 07-2008, Руководство по эксплуатации

Страница: 74 / 198

55
Allocating I/O from the Configurator Section 4-3
TC2
Note 1. Always allocate the first word of the OUT Area to the OUT Enable Bit.
2. These parameters are for expansion remote I/O.
TC4
Assigned to IN
Area
Assigned to
OUT Area
Parameter name
Yes No Output Completed Flags
Yes No Read Parameter Monitor (See note 2.)
No Yes OUT Enable Bit (See note 1.)
No Yes OUT Enable Bit 2
No Yes Read Parameter (See note 2.)
No Yes Write Parameter (See note 2.)
Yes No Communications Status
Yes No Communications Error Status
Yes No Unit Status
Yes No Alarm 1 (TC2: #00
−
#07)
Yes No Alarm 1 (TC2: #08
−
#15)
Yes No Alarm 2 (TC2: #00
−
#07)
Yes No Alarm 2 (TC2: #08
−
#15)
Yes No Alarm 3 (TC2: #00
−
#07)
Yes No Alarm 3 (TC2: #08
−
#15)
Yes No HB Alarm (TC2: #00
−
#07)
Yes No HB Alarm (TC2: #08
−
#15)
Yes No HS Alarm (TC2: #00
−
#07)
Yes No HS Alarm (TC2: #08
−
#15)
Yes No OC Alarm (TC2: #00
−
#07)
Yes No OC Alarm (TC2: #08
−
#15)
Yes No Input Error (TC2: #00
−
#07)
Yes No Input Error (TC2: #08
−
#15)
Yes Yes Run/Stop (TC2: #00
−
#07)
Yes Yes Run/Stop (TC2: #08
−
#15)
Yes Yes AT Execute/Cancel (TC2: #00
−
#07)
Yes Yes AT Execute/Cancel (TC2: #08
−
#15)
Yes Yes Auto/Manual (TC2: #00
−
#07)
Yes Yes Auto/Manual (TC2: #08
−
#15)
No Yes Software Reset
Yes Yes #0 ch1 Specified Parameters (See note 2.)
Yes Yes #0 ch2 Specified Parameters (See note 2.)
Yes Yes #1 ch1 Specified Parameters (See note 2.)
Yes Yes ---
Yes Yes #15 ch2 Specified Parameters (See note 2.)
Allocated in IN
Area
Allocated in
OUT Area
Parameter name
Yes No Output Completed Flags
Yes No Read Parameter Monitor (See note 2.)
No Yes OUT Enable Bit (See note 1.)
No Yes OUT Enable Bit 2
No Yes Read Parameter (See note 2.)
No Yes Write Parameter (See note 2.)