Omron EJ1 - 07-2008 Скачать руководство пользователя страница 113

Страница: 113 / 198

Operations from the Edit Device Parameters Window

Section 5-2

This icon indicates a parameter that is read only.

b) The Temperature Controller parameters are stored even if the

power is turned OFF.

Select the tab page of the channel for which the parameters are to be ed-
ited, and edit the parameters.

Click the parameter to be edited, and change the contents.

Note a) Click the

Download

Button to download all parameters. When this

operation is performed, the Unit will be reset, so do not use this op-
eration while the Unit is in RUN mode.

b) By clicking the

Button in the

Parameter Group

field, the dis-

played parameters can be changed as follows:

• All parameters

• Parameters that can be changed during operation

• Parameters that can be changed when operation is stopped.

c) Click the

Default Setting

Button to return parameters to the fac-

tory settings.

d) Click the Upload, Download, Compare, and Default Setting But-

tons in the Edit Unit Parameters Window to perform operations on
the parameters for the specified channel only.

e) Use the

Download can be changed during operation

Button to

download parameters that can be changed during operation. The
Unit will not be reset.

Click the

Button.

The display will return to the Edit Device Parameters Window for the De-
viceNet Communications Unit.

Note

All the new settings will be canceled if the

Cancel

Button or

But-

ton is clicked to exit the window. Always exit the window by clicking
the

Button.

To continue editing the parameters of other Temperature Controllers, re-
peat the procedure from step 1.

Содержание EJ1 - 07-2008







































































































































































































Результаты поиска

Содержание EJ1 - 07-2008

Отзывы:

Бренды по названию

Популярные бренды

Omron EJ1 - 07-2008, Руководство по эксплуатации

Результаты поиска

Содержание EJ1 - 07-2008

Отзывы:

Бренды по названию

Популярные бренды