Omron CS1W-CT021, Руководство по эксплуатации

Страница: 32 / 201

6&($7-3'%"'-84-9#1#"#*$#-:&(.#
Section 1-4
$*
*
1
The 500 kHz filter can only be configured for the Counter Inputs (not for the Dig-
ital Inputs).
*
2
If in a mixed configuration of Simple/Circular/Linear Counters one or more of
the Digital Outputs have been configured to have Interrupt functionality, then
this functionality is applied to the Outputs, both if they are controlled manually
as well as automatically.
*
3
If in a mixed configuration of Simple/Circular/Linear Counters one or more of
the Digital Inputs have been configured to have Interrupt functionality, then this
functionality is applied to the Inputs on a rising or falling edge depending on the
Digital Input Function for which the Digital Inputs have been configured.
Simple Counter Circular / Linear Counter Reference
section
7 Reset Signals 3-6
•
Software Reset Bit
•
Software Reset Bit
•
Digital Input
•
Z-signal
3-6
8 Programmable Output Pulses 3-7-1
•
No (=default)
•
Yes 3-7-1
9 Rate Measurement 3-7-2
•
No (=default)
•
Yes 3-7-2
10 Hysteresis 3-7-3
•
No (=default)
•
Yes 3-7-3
11 Noise Filtering Digital Inputs and Counter Inputs 3-7-4
•
50 kHz (=default)
•
10 kHz
•
50 kHz
•
500 kHz *
1
3-7-4
12 Initial Counter Value 3-7-5
•
No (=default)
•
Yes 3-7-5
13 Supported IORD / IOWR-instructions to read / write 4-5
•
DM-data 4-5-1
•
Range- and Comparison Data 4-5-2
•
Captured Counter Value
•
Captured Counter Value 4-5-3-1
•
Rate History Log File data 4-5-3-2
•
Counter Value
•
Counter Value 4-5-3-3
•
(Re) Configure Unit 4-5-3-4
•
Error Clear
•
Error Clear 4-5-3-5
14 Interrupts of Outputs 4-6-1
•
No*
2
(=default)
•
Yes 4-6-1
15 Interrupts of Digital Inputs 4-6-2
•
No*
3
(=default)
•
Yes 4-6-2
W902-E2-03.book Seite 17 Donnerstag, 7. Oktober 2004 2:06 14