Omron CS1 -, Руководство по эксплуатации

Страница: 107 / 173

6-4 Section AR Area
87
Address Forced
set/reset
Controlled
by
Details Function Bits
AR 17 00 Analog Output 1
User Adjustment
Flag The default setting is OFF. When offset/gain
adjustment is performed by the user, these
bits turn ON, and when the adjustment
l l d d t t th i f t
Unit Enabled
01 Analog Output 2
User Adjustment
Flag
, j
values are cleared and reset to their factory
settings these bits return to OFF.
02 to 03 (Reserved by system.)
04 Analog Output 1
Operation In
Progress ON: Analog output is being changed using
the ACC instruction.
OFF: Analog o tp t has reached the target
05 Analog Output 2
Operation In
Progress
OFF: Analog out ut has reached the target
value.
06 to 07 (Reserved by system.)
08 Analog Output 1
Output SV Error ON: A value that exceeds the allowable
range has been set for analog output SV.
OFF: The values set for analog output SV
09 Analog Output 2
Output SV Error
OFF: The values set for analog out ut V
lie within the allowable range.
Note: This bit is valid only when the analog
output method is set to END refresh.
10 to 11 (Reserved by system.)
12 Analog Output 1
Factory Setting
Adjustment Error
ON: There is an error in the factory-set data
stored in FROM.
OFF: There are no errors in the factory-set
13 Analog Output 2
Factory Setting
Adjustment Error
OFF: There are no errors in the factory-set
data stored in FROM.
14 Analog Output 1
User Adjustment
Error
ON: There is an error in a user adjustment
value stored in FROM.
OFF: There are no errors in the ser
15 Analog Output 2
User Adjustment
Error
OFF: There are no errors in the user
adjustment values stored in FROM.