3-2.10 2
)ハンドオーバ機能の詳細説明
/ Details of Hand-over Function
②.作業者がドアを開けて部屋を移動
The engineer opens the door and moves the room
③.ドアを閉じる
Close the door
④.作業を開始する
perform the task
①.ドアは閉状態
The door is closed
現場でハンドスイッチ1段目を押下する。
Push down the 1st step of the hand switch in the work site.
この時、ハンドスイッチはホルダ1とのみ通信しており、ホルダ1の
SW1
出力が制御盤に入力されます。
At this time, the hand switch communicates only with the holder
1, and the SW1 output of the holder 1 is input to the control
panel.
ハンドスイッチ1段目を押下したまま制御室へ移動する。
Move to the control room while pressing the 1st step of the hand
switch.
この時、ハンドスイッチはホルダ1、ホルダ2と通信しており、ホル
ダ1とホルダ2の
SW1
出力が制御盤に入力されます。
At this time, the hand switch is communicating with the holder 1
and the holder 2, and the SW1 output of the holder 1 and holder
2 is input to the control panel.
制御室でハンドスイッチ1段目を押したまま部屋のドアを閉める。
Close the door of the room while holding down the 1st step of
the hand switch in the shooting room.
この時、ハンドスイッチはホルダ2とのみ通信しており、ホルダ2の
SW1
出力が制御盤に入力されます。
At this time, the hand switch communicates only with the holder
2, and the SW 1 output of the holder 2 is input to the control
panel.
ハンドスイッチ2段目を押下し作業を実行する。
Press the second stage of the hand switch to perform the task.
この時、ハンドスイッチはホルダ2とのみ通信しており、ホルダ2の
SW1,SW2
出力が制御盤に入力されます。
At this time, the hand switch communicates only with the holder
2, and the SW1 and SW2 outputs of the holder 2 are input to the
control panel.
3.各種機能
/ Functions
52
Содержание C2UW-L Series
