Omron BL100T, Инструкция по эксплуатации

Страница: 58 / 83

4 Cleaning
4-3 Cleaning
BL50T/BL75T/BL100T
58
Important notice
After battery replacement, be sure to reset the battery life counter.
● After replacing the battery, from the screen displayed by selecting [Control] - [Reset
B.life counter] in the LCD menu of the UPS, reset the battery life counter.
If the battery life counter is not reset, a battery replacement alarm may occur before
the expected life of the battery expires.
Write the battery replacement date in the enclosed battery replace date sticker and
attach it to the main body.
Alternatively, the battery replacement date can be also entered on the screen displayed
by selecting [Settings] - [Battery Setting] - [Battery Installation] (battery replacement
date) in the LCD menu.
※
OMRON is collecting an unneeded replaced battery, with only transportation charges
borne by the customer.
For details, refer to the attached "UPS Replacement Service" pickup request.
4-3 Cleaning
Remove dust from the "AC input" plug and "power supply output" receptacles of the UPS
Stop all the connected devices and the UPS and disconnect the "AC input plug" from a
wall outlet (commercial power).
Then, remove dust with a dry cloth and connect again.
When you are not sure about the connection method: Refer to "How to connect the
device to back up".