Omron Microscan LVS 7000, Руководство по эксплуатации

Страница: 138 / 187

LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X Page 138 of 187

RatioMethod=2 should only be configured by a qualified
Omron Microscan
representative.

TouchMode=1 – OCR and OCV will perform extra processing to handle the case in which characters are
touching. The characters must be the same height and width and all characters must be evenly spaced.
[OCR]
Debug=0
MaxHorizontalShift=0
RatioMethod=2
TouchMode=0
OCV:

MinimumPassScore sets the default pass score for OCV

MinimumWarningScore sets the default warning score for OCV
[OCV]
MinimumPassScore=40
MinimumWarningScore=60
PLC:

DataValidOutputLine should only be configured by
an Omron Microscan
representative.

DataValidDwell should only be configured by
an Omron Microscan
representative.

PassOutputLine should only be configured by
an Omron Microscan
representative.

FailOutputLine should only be configured by
an Omron Microscan
representative.
[PLC]
DataValidOutputLine=0
DataValidDwell=0
PassOutputLine=0
FailOutputLine=0
Preset:
When enabled, allows the preset configuration settings buttons to appear on the “Step 4: Define Sector Type”
(Blemish settings) screen. Buttons include: “Low,” “Medium,” “High,” “Set this Job,” and “Set new jobs.”

UseFeature=0 – Default setting. Disables the preset configuration settings buttons.

UseFeature=1 – Enables the preset configuration settings buttons.

Low, Med, and High are set via the LVS-7000 system.

Default=”Med” – This is the default setting for new blemish sectors. Valid entries for this setting are “Low,”
“Med,” and “High.”
[Preset]
UseFeature=1
Low=65,65,15,65,24,25,59,50,39
Med=75,75,15,75,15,25,59,50,39
High=85,85,5,85,5,25,59,50,39
Default=”Med”
PopUp:

ShowCameraWarning allows the software to show a popup message when the number specified in the
CpuUtilizationWarning is reached.