Omron Microscan LVS 7000, Руководство по эксплуатации

Страница: 136 / 187

LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X Page 136 of 187
RegradeOnReverse=0
SetRunStatusOutput=0
ShowRollerOnReverse=0
SimulateStopMotion=0
SpliceToCamera=100
StopLoggingOnError=0
StopMotionDelay=40
UseVSyncInput=0
Grading:
Grading is the default value the LVS-7000 uses when a grading sector has been created. This will make the
creation of multiple sectors quicker as the operator can just accept the default value and move on.

AutoSetupGrade1D
o
AutoSetupGrade1D=0 – Tells AutoSetup to Read 1D barcodes
o
AutoSetupGrade1D=1 – Tells AutoSetup to Grade 1D barcodes

AutoSetupGrade2D
o
AutoSetupGrade2D=0 – Tells AutoSetup to Read 2D barcodes
o
AutoSetupGrade2D=1 – Tells AutoSetup to Grade 2D barcodes

LightFrequency tells the software what color line light to expect
o
LightFrequency=0 indicates the LVS-7000 will report the use of red light (660nm).
o
LightFrequency=1 indicates the LVS-7000 will report the use of white light.

MaxDecodesToGrade is the amount of decodable scan lines it takes to grade a barcode. ANSI standards
require at least 10 lines.

MinimumPassScore activates an error signal and logs an error in the log.

MinimumWarningScore activates a warning that alerts an operator without generating an error in the log.
This value is user configurable.

Override1DAperture should only be configured by a qualified
Omron Microscan
representative.
[Grading]
AutoSetupGrade1D=1
AutoSetupGrade2D=1
LightFrequency=1
MaxDecodesToGrade=10
MinimumPassScore=1.5
MinimumWarningScore=2.5
Override1DAperture=0
Image Saver:
Image Saver is a path to be specified to store images to. A target folder must be made and the path to that target
folder is to be put directly after the path=. As an example
Path=C:\Images would need a folder called Images
under the C:\ drive. It will store all incoming images to that directory. This will show a Pop up window reminding
the operator that it was set as it will consume massive processing power and HDD space if left with a path
specified.
SaveLabelRepeat 0=save every unsynchronized label, 1= Save every synchronized label, 2,3,4,5= Save every
label multiple of ( ex 2 every other, 3 every third,…etc) synchronized.
[ImageSaver]
Path=
SaveLabelRepeat=0
Store Jobs to a Different Location: