Omron Microscan LVS 7000, Руководство по эксплуатации

Страница: 142 / 187

LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X Page 142 of 187
o
HideAlarmMatrix=1 hides the Alarm Matrix screen. The software will skip “Step 6: Alarm Matrix”
and the user will never see this screen.

IgnoreHealthCheck is for
Omron Microscan
technician use only.
o
IgnoreHealthCheck=0 (default) performs HealthCheck on 1D and 2D codes
o
IgnoreHealthCheck=1 performs HealthCheck on 2D codes and grading on 1D codes.
o
IgnoreHealthCheck=2 performs HealthCheck on 1D codes and grading on 2D codes.
o
IgnoreHealthCheck=3 ignores the HealthCheck code.

Inactivity Timeout automatically logs out any user if the system is left idle for the defined amount of time.
This value is defined in minutes.

IncludeRimsBarcodeInJobName=0
o
IncludeRimsBarcodeInJobName=0 feature is off.
o
IncludeRimsBarcodeInJobName=1 indicates the ShowPrintBarcode="STRING" will automatically
be appended to the autosetup job name to ensure there are no duplicate job names in a RIMS
system.

JobQRCode should only be configured by a
n Omron Microscan
representative.

LaneDivision splits a job into its separate lanes for RIMS systems in case they were slit on the press; it
prints a barcode per lane as well. Note that LaneDivision does not function in conjunction with the Turret
signal.
o
LaneDivision=0 means the feature is disabled.
o
LaneDivision=1 means the feature is optional -- prompt the operator whether or not to split lanes.
o
LaneDivision=2 means the feature is required -- do not prompt the operator.
o
LaneDivision=3 is for non-RIMS applications where "channel" information is uploaded via Tcp/Ip.
o
LaneDivision=4 divides the web into lanes to make separate log files per lane.

LastBCLCode is active when LaneDivision=4. A unique roll number given

LastBCLRoll is active when LaneDivision=4.

LvsContactSensor is for
Omron Microscan
technician use only. It designates the type of contact sensor
used with LVS-7000 systems.
o
LvsContactSensor=0 is off
o
LvsContactSensor=5 is the 5” sensor
o
LvsContactSensor=8 is the 8” sensor

LvsContactSizeY is for
Omron Microscan
technician use only.

MakeReady is used when the operator needs to ignore a specified string in a sector at the beginning of a
job. For instance, type in the word VOID and the software will ignore that word at the beginning of the job
only.

MaxCpuBusyPercent is the maximum allowable CPU usage as a percentage. If the CPU usage exceeds
this value, sectors will be Not Assessed (NA) until the CPU utilization drops to a point equal to this value.
Default is 100.

MaxErrPerSec prevents the software from failing when inundated with errors; it will not create more than
30 thumbnails of errors per second. After 30 errors, no more thumbnails will be collected until the next
second.

MaxThumbnails is the amount of thumbnail images that will be stored.

MaxTriggerGap causes an error if photo-eye triggers have stopped after a certain distance. Do not alter
this setting unless instructed by a
n Omron Microscan
technician.

MinimumPreserveLength

MonitorInterval

MonthsBeforePasswordChange prompts users for passwords to be changed after the number of months
entered.

NumGrabImages=0

NumPacketThreads is the number of threads; it is set by how many processing CORES are available per
PC.

OneBigBlemishSector make the autosetup feature not separate label lanes.

PDF417UEC stops PDF from using ISO. PDF417UEC =1 only uses UEC as grade.