Omron Microscan LVS 7000, Руководство по эксплуатации

Страница: 82 / 187

LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X Page 82 of 187
For all sector types other than Blemish and Delta E , the Global copy button is visible on the “Step 5: Setup
Matching” screen (see below).
Global Copy Requirements
The Global copy button appears only if:

There is more than one label per repeat.

There are at least two sectors.

There is at least one pair of comparable sectors (same sectors in different lanes)

The user is on the final step of setting up the sector type.
To define comparable sectors (the same sectors in different lanes), the sectors must:

Have the same sector type (such as Barcode Read, etc)

Have the same width (within 20 pixels)

Have the same height (within 20 pixels)

Have the same distance from the top of the label (within 20 pixels).
Note: A simple solution to meet the above requirements is to copy and paste the first sector to
the second sector. See the “Copy an Entire Sector” section (within the “Step 3: Create Sectors”
section) for steps on copying sectors.
Use Global Copy to Add Sectors to All Labels Across the Screen
1. Create a sector in the left-most lane.
2. Click the Global Copy button.
3. A new sector is created with matching parameters of the first sector.
The LVS-7000 only creates the number of labels defined in the “Labels per repeat” field on the “Step 1: Set label
repeat” screen (see below).