Omron Microscan LVS 7000, Руководство по эксплуатации

Страница: 171 / 187

LVS-7000 Operations Manual Version 5.6.X
LVS-7000 Operations Manual Version 5.6.X Page 171 of 187
8. When the settings for each desired tile are complete, perform the steps below in any order:
a. View all of the tiles at once by clicking either the 2 x 2, 3 x 3 or 4 x 4 buttons.
b. Cycle through the tiles by clicking the “Cycle” button. This displays a maximized view of each time one at
a time for the specified duration of each tile. Tiles with a hold time set to zero (0) will not appear.
Tiles are cycled row by row, from left to right, starting with the upper left tile:
c. Click the “Freeze” button to freeze a single tile. Pressing the “Freeze” button does not stop image
updates; it keeps the current tile maximized and will not move to the next tile.
Tip: Double-clicking on the screen automatically switches between Cycle mode and Freeze mode.
9. When analysis is complete, shut down the AutoScan program by clicking the red X in the top right corner of
the screen.
10. A “Save Changes” message appears indicating that AutoScan settings have changed and prompts you to
save or not save the changes with the job.

Click “Yes” to save the changes. If a job is running, the changes are stored with the job.

If no job is loaded and the web is running with external synchronization, the changes are stored to a
default file that will load the next time AutoScan is opened from the Welcome screen.

Click “No” to discard the changes.

Click “Cancel” to cancel the message and continue running the AutoScan program.