Omnitracs MCP100 страница 26 Скачать руководство пользователя

Страница: 26 / 256

Accessory Cables for the MCP100—Standard and Full Function

Component Overview

2-6

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

80-J4866-2 Rev. G

Accessory Cables for the MCP100—Standard and Full Function

Speaker Switch Cable

• Connects a vehicle’s speaker to the accessory cable.

• Cable length is 8 feet.

• Do not need if a dedicated speaker is added to the vehicle for text-to-speech (TTS). TTS

allows a driver to safely listen to dispatch messages without pulling off the road.

Power Cable

• Connects the +12/24 VDC unswitched power source (battery), the +12/24 VDC switched

power (ignition), and the system ground to the MAS.

• Standard length is 20 feet.

Backup Battery

• MCP100 requires a rechargeable lead-acid

battery installed into the MAS.

• Do not return the backup battery to Omnitracs.

• For more specific information about the backup battery,

see

Chapter 5

Caution

When vehicle power is lost to the MCP100, the backup battery allows the MAS to
shut down gracefully and properly store data. Without a healthy battery installed,
there is a high probability of experiencing data loss or corruption.

Standard Accessory Cable

Full Function Cable

• Connects accessories and options, such as the Performance Monitoring system, Trailer

Tracks, and the RCD and speaker to the MAS for text-to-speech (TTS) play.

• Standard length is 20 feet.

• Does not support wiring for the CDU,

Axle, RPM, PTOP, or PTOC.

• Supports wiring for the CDU, Axle, RPM,

PTOP, and PTOC.

Pull Tab

05AAA_044BQMCP

Battery Pack

Содержание MCP100

































































































































































































































































Результаты поиска

Содержание MCP100

Отзывы:

Похожие инструкции для MCP100

Бренды по названию

Популярные бренды

Omnitracs MCP100, Руководство по установке

Результаты поиска

Содержание MCP100

Отзывы:

Похожие инструкции для MCP100

Бренды по названию

Популярные бренды