Professional
Specifications are subject to change without notice. © 2014 All Rights Reserved
John F Kennedylaan 3, 5555XC, Valkenswaard, The Netherlands
CONNECT YOUR ACTIV8
Connect the Activ8 tracker to a PC using
the USB adaptor. A window will open.
Note: the first time you connect it may take a minute
before the window opens.
IMPORTANT
Make sure you are fully charged at all times.
Charging : red light is on. Fully charged: red light is off.
3
CHECK ACTIVITY LEVEL
Clients can check their activity level by turning the Activ8
tracker up and down. The device will show progress
towards the set daily target.
Note: disable the display completely by entering a target
of 0 kcal.
It’s recommended to recharge the battery at least every
3-4 weeks to secure measured activity data!
charge indicator
START THE RECORDING TOOL
Open the folder “Activ8 Recording Tool” on your desktop
and doubleclick “Activ8.exe” to start the Activ8 recording
tool application.
4
DOWNLOAD APPLICATION
Open the following link in your default browser:
Download, store and unzip Activ8RecordingTool.zip
on your desktop. Discard the warning “not commonly
downloaded and could be dangerous”.
1
INSTALL DRIVER
Open the folder “Desktop\Activ8 Recording Tool\driver”
and right-click on the file “atmel_devices_cdc.
inf
” and
select “Install”.
In case you get a security warning, click “OPEN”, when
you get the question “Do you want the following pro-
gram to make changes to your computer?”, click “YES”.
You should see a message that the operation was com-
pleted successful.
2
