Omnitracs MCP100 страница 16 Скачать руководство пользователя

Страница: 16 / 256

MCP100 Overview

How the MCP100 Works

1-2

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

80-J4866-2 Rev. G

MCP100 Overview

• Provides two-way, mobile information transmission and other value-added services.

• Provides vehicle location and performance data including, hours of service, navigation,

inter-state operations, safety and accident prevention, and optimization of fuel
management.

Why MCP100 Makes Companies More Efficient

• Companies can maintain two-way contact with their vehicles and drivers 24 hours a day.

• Dispatchers can send pickup and delivery information directly to drivers, keeping vehicles

on the road.

• Text-to-speech alerts drivers of incoming messages and their importance, so drivers can

choose to immediately listen to messages without pulling off the road.

• Dispatchers know when vehicles are expected to arrive at locations, and can pass that

information on to customers.

• Provides dispatchers with vehicle location and position history information by tracking the

location of each MCP100 using latitude and longitude or distance and direction from
landmarks (usually large towns and cities).

• Drivers can inform the dispatcher of road conditions or problems.

• Optional devices allow monitoring of driver performance, engine diagnostics, trailer

locations, and refrigeration status.

• Decision support software enables customers to optimize assets and inform shippers and

consignees of load status.

• Over-the-air software upgrades allow drivers to remain on the road rather than having to

stop at service centers.

• Omnitracs media display unit (MDU) offers enhanced capabilities, such as touchscreen

and color graphics for an easy to understand user interface which reduces training time.

• Hours of service data ensures regulatory compliance.

• On-board navigation application provides truck-specific route mappings.

• International Fuel Tax Agreement (IFTA) simplifies fuel reporting for inter-state operations.

• Helps with safety and accident prevention.

• Optimizes fuel management.

Содержание MCP100

































































































































































































































































Результаты поиска

Содержание MCP100

Отзывы:

Похожие инструкции для MCP100

Бренды по названию

Популярные бренды

Omnitracs MCP100, Руководство по установке

Результаты поиска

Содержание MCP100

Отзывы:

Похожие инструкции для MCP100

Бренды по названию

Популярные бренды