OMG MF 64, Инструкция по эксплуатации

Страница: 108 / 180

MF 64
Author: Donato Gavino Murru donato.gavino.murru@omgitaly.com Pag. 107 a 179
Index Main Page
Adjust the value of index, the speed, and acceleration with the HMI.
NOTE: If the machine is in security exclusion mode, the manual movements are enabled only
pushed the reset button at the same time with the arrows for the direction shift.
In this page you can adjust the rails width in manual, in the entry zone, work zone and the both
zone at the same time, with the arrows.
The quote “Actual Zone” indicate the rails real position. To make the reference setting, adjust the
rails to the desired position, measure with a meter, write the quote in the “Reference Zone” and
push the white symbol. If you want shift the rails to a definite measure, digit the width on the target
zone and push the target symbol.
Push here to change values.
Film advance buttons for step and discharge
Push here for change
index parameters
Push here for adjust
rails width
Index manual
movements
Index manual movements