MF 64
Author: Donato Gavino Murru [email protected]
Pag.
99
a
179
Automatic Cycle
Before proceeding with the automatic cycle, make sure that the heaters are on and have reached
the operating temperature set by the user.
When the film is embarked in the machine and you want to activate the automatic cycle, it is
recommended that in the cases described at the beginning of the chapter, activate the preheating
device by pressing in correspondence of the edges on the layout of the main page.
This will ensure sufficient heating for the film to be easily perforated by the chains.
Note:
During the automatic operation of the system, the opening and closing movement of the
blades is synchronized automatically with the steps of the thermoplastic film: The pincers open
when the film must slide forward and close when the film stops at the end of the step.
Содержание MF 64
Страница 24: ...MF 64 Author Donato Gavino Murru donato gavino murru omgitaly com Pag 23 a 179 Left Side Fixed safety guards...
Страница 25: ...MF 64 Author Donato Gavino Murru donato gavino murru omgitaly com Pag 24 a 179 Right Side Fixed safety guards...
Страница 31: ...MF 64 Author Donato Gavino Murru donato gavino murru omgitaly com Pag 30 a 179 SRP CS components...
