MF 64
Author: Donato Gavino Murru [email protected]
Pag.
144
a
179
Troubleshooting
Symptom
Probable cause
Item to check
Countermeasure
s
Interventions mode
The final shapes
are not so defined.
Need more hole in
the mold.
Flow control or
valves not adjusted
properly.
Air Pressure no
sufficient.
Holes in the
mold.
Valves and
flow control.
Pressure
gauge.
Increase number
of holes in the
mold.
Use a drilling machine
to make more holes.
Increase pressure
flow control.
The pieces touch
the mold when the
index is working.
The pieces still
attached on the
scrap falling down.
Travelling of
the Forming
Press Tables
too low.
Increase the
travelling distance
of tables.
From menu page
reach the movement
tables regulations of
motor axis.
The shape is thin
on bottom part of
the shapes.
The plug doesn’t
work.
Travelling or
speed of plug
need to be
lower.
Increase the
travelling distance
of mold.
From menu page,
check the movement
plug adjustments.
The mold is not at
the good
temperature.
Water not working.
Temperature
set on the
chiller or
valves not
open.
Open the valves
and adjust flow
and water
temperature.
On front of the
machine there are
valves, on the forming
press station and
under the chiller.
Содержание MF 64
Страница 24: ...MF 64 Author Donato Gavino Murru donato gavino murru omgitaly com Pag 23 a 179 Left Side Fixed safety guards...
Страница 25: ...MF 64 Author Donato Gavino Murru donato gavino murru omgitaly com Pag 24 a 179 Right Side Fixed safety guards...
Страница 31: ...MF 64 Author Donato Gavino Murru donato gavino murru omgitaly com Pag 30 a 179 SRP CS components...
