400715D-EN
22
3.
Hold the top of the
inlet body
to counteract the torque, loosen the
nozzle body
.
Figure 35
4.
Remove the
nozzle body
from the
Tilt-A-Jet
.
5.
Remove the
retainer ring
[1] and set it aside.
Figure 36
For cleaning the nozzle assembly, go to
Clean and Examine the Nozzle Assembly
For cleaning or replacing the final filter assembly, go to
Clean or Replace the Final Filter
.
MAINTENANCE
NOTICE
All maintenance activities must be performed by qualified personnel to prevent damage to the machine.
Follow the maintenance schedule to make sure the equipment performance is reliable. The frequency of most
maintenance activities depends on the length of time the equipment has been in operation. However, harsher than usual
environmental conditions may require more frequent scheduled maintenance activities than shown in the maintenance
schedule.
Содержание MAXJET 5i 305617 Series
Страница 32: ...32 400715D EN...