Omax MAXJET 5i 305617 Series, Руководство по установке и обслуживанию

Страница: 5 / 32

5
400715D-EN
Wear Gloves
Bacteria in the tank water can build up. A minor break in the skin can introduce harmful
bacteria into a wound. Always wear protective gloves if there are cuts or open wounds on the
hands. When setting up material for cutting, wear gloves that provide protection against sharp
metal edges.
Read the product labels and refer to product Safety Data Sheets (SDS) to identify properties
and hazards of chemical products and materials referenced in this document. Handle in
accordance with good industrial hygiene and safety practice. Use personal protective
equipment as specified in the SDS.
Read Manual
Read the equipment operator's guide for specific operator instructions and additional safety
requirements. Do not attempt to operate this machine until all safety precautions and
operating instructions are read and understood.
Electrostatic Discharge
Attention! Observe precautions for handling electrostatic sensitive devices.
Safety Legend
The following safety signal word panels and paragraph notifications may appear throughout this and other
documentation. Each provides safety issue identification and recommended actions to avoid the hazard. Be alert!
Follow the recommended safety actions and precautions to prevent injury or damage to the equipment.
WARNING
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Used to address practices not related to physical injury—property damage only.
NOTE
Used to provide supplementary information, emphasize a point or give a tip for easier operation.