Omax MAXJET 5i 305617 Series, Руководство по установке и обслуживанию

Страница: 14 / 32

400715D-EN
14
5. Hold the inlet body to counteract the torque, then tighten the nozzle body .
Figure 15
6. Install the mixing tube . See Install the Mixing Tube .
7. Connect the abrasive feed tube to the nozzle and the abrasive hopper , if needed.
Figure 16
Install the Nozzle Body on a Tilt-A-Jet
NOTICE
Remove the mixing tube BEFORE installing or removing the nozzle to prevent damage. Large upward
forces from an installed mixing tube can misalign the internal nozzle components.
1. Remove the mixing tube if it is installed in the nozzle body . See Remove the Mixing Tube .
NOTICE
Handle the nozzle carefully to prevent damage to the abrasive tubing retention tube.