Olympus USPM-RUIII Series, Руководство по эксплуатации оборудования

Страница: 22 / 143

PV6088-F4E017 22
4. ASSEMBLING AND CABLING
Assemble the unit and layout the wiring as shown in (Fig. 4):
1) Install the ocular body tube into the main unit. Fix it with a lateral screw.
Size of the fixture screw: M5
Hexagon wrench: 2.5 mm
2) Insert the eyepiece (MICRO SWH10×) into the tube at the right of the ocular
body tube.
3) Insert objective lenses (MPLFLN10× and MPLFLN20×) into the revolving
nosepiece of the main unit. In a measurement, you can rotate the revolving
nosepiece to place the lens you want to use into the near side.
Main unit
Ocular body
tube
Fixture screw
Figure 4. Assembling and Cabling Diagram
Input voltage is configured to 100
–120 V or 220–240 V, depending
on the shipment destination. There is a label indicating the voltage
setting on the back surface. Use this product within the voltage
range. Otherwise, there is a risk of damage or fire. Make sure to
contact our service department when you move it into a place
having a different voltage range.