Olympus USPM-RUIII Series Скачать руководство пользователя страница 110

Страница: 110 / 143

16. Contact Address

PV6253-F4E016

17. SOFTWARE LICENSE AGREEMENT

Product Name : USPM-RU

Ⅲ

Version : 3.21

THIS IS A VALID AND LEGALLY ENFORCEABLE AGREEMENT BETWEEN YOU

(EITHER AN INDIVIDUAL OR A SINGLE ENTITY) AND OLYMPUS CORPORATION

("OLYMPUS"). THE SOFTWARE INCLUDES OLYMPUS' COMPUTER PROGRAM,

ASSOCIATED PRINTED MATERIALS, DATA AND INFORMATION, WHICH ARE

PROVIDED IN THIS PACKAGE OF SOFTWARE PRODUCT. BY DOWNLOADING,

COPYING OR OTHERWISE USING THE SOFTWARE, YOU AGREE TO BE BOUND BY

THE TERMS AND CONDITIONS OF THIS AGREEMENT. OLYMPUS GRANTS TO YOU A

NON-EXCLUSIVE LICENSE TO USE THE SOFTWARE, PROVIDED THAT YOU AGREE

TO THE FOLLOWING TERMS AND CONDITIONS:

Section 1 Intellectual property

All title and copyrights of the Software are owned by Olympus. The Software is also protected by

treaties. The Software is licensed, not sold.

Section 2 Conditions of use

1. You may copy and use the Software on multiple computers.

2. You may copy the Software for backup purposes.

3. The Software is subject to change without notice.

Section 3 Rental and transfer

You may not rent, lease, sublicense or lend the Software or a copy of the Software. You may,

however, transfer all of your rights under this Agreement, provided you retain no copies of the

Software, and the recipient agrees to the terms and conditions of this Agreement.

CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THIS

LICENSE AGREEMENT BELOW BEFORE USING THE SOFTWARE.

Содержание USPM-RUIII Series
















































































































































Результаты поиска

Содержание USPM-RUIII Series

Отзывы:

Бренды по названию

Популярные бренды

Olympus USPM-RUIII Series, Руководство по эксплуатации оборудования

Результаты поиска

Содержание USPM-RUIII Series

Отзывы:

Бренды по названию

Популярные бренды