into the sockets.
12.2 Right Panel
The units described below must be assembled and adjusted by Olympus. If these units are
assembled or adjusted by the customer, the operations are not ensured.
Depending on your system configuration (with or without loader) the
VS200 system comes with two different right side panels. The side panel of
the loader variant has an opening for loading the trays.
The mounting of the right side panel is similar to the left panel. There are two
rubber sockets (quick locks at the top) and two small pins close to the bottom
of the VS200 scanner and three grounding flags.
1. First connect the two grounding flags to the side panel.
2. Mount the side panel so that the rubber rings of the panel fit onto the small
pin on the VS200 system.
3. Once the pins are inside the rubber rings push the panel towards the frame
and finally push it down so that the quick lock pins of the side panel fit into
- 64 -
Instructions for use
12 Assembly of the housing for scanner
OLYMPUS VS200 System
