2 Safety
2.5
Safety instructions for the laser
1. The loader uses a laser sensor. Never remove the warning and caution
labels on the product. The semiconductor laser for loader incorporated in
this product it designated as a product of the following class.
CLASS 1 LASER PRODUCT(IEC60825-1:2007 / IEC608251:2014)
This product complies with 21 CFR 1040. 10 and 1040. 11 except for
deviations pursuant to Laser Notice No. 56, dated June 24, 2007.
2. Never attempt to remove the cover using a tool. There is a risk of exposure
to the internal strong laser beam as well as other malfunction or failure.
3. Do not look into the light source either directly or indirectly. Otherwise, eye
inquires may occur.
2.6
Safety instructions for X-Cite Turbo and X-Cite Xylis
The X-Cite Turbo light source is not available in all countries.
Follow the safety precautions at all times during operation and maintenance of this
product. Non-observance may result in eye injury or damage to the system.
CAUTION
Risk of injury to the eyes
Do not look at operating lamp/LED as it can emit UV light.
Never look into the light emitting end of the light guide. The light could
severely damage the eye if the light is observed directly.
Always make sure the liquid light guide and X-Cite adapter are securely attached
to the VS200 system. This will minimize the risk of exposure to the UV light.
If the light source has a malfunction please contact Olympus or Excelitas cus-
tomer support. If the light source is serviced always make sure that the power
cord is disconnected.
Place the unit onto a hard, stable surface and make sure the ventilation openings
are not covered by something.
- 13 -
Instructions for use
OLYMPUS VS200 System
