olympia electronics GR-750 Series Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 71

olympia electronics GR-750 Series Скачать руководство пользователя страница 57

GR-750x series

Control panel for addressable emergency
luminaires

Document number: 923750400_09_007

Date: 3/5/2022

Page: 57 of 71

[57]

5.4.10 FACTORY RESET

Option to reset system settings to the factory default values.

5.4.11 FIRMWARE UPDATE

Firmware update menu using any available internet connection. If there is an available update for the firmware
of the panel or the ETHERNET/WIFI card, the update process can be started, after the user confirms it. The
typical update time is around 12-15 minutes for the panel and 5 minutes for the ETHERNET/WIFI card.

WARNING

During the update process the panel will

NOT

operate as expected from a control panel for

emergency luminaires (it will be running the update process). Perform the update only if
certain that during the update process no safety issues will arise.

5.5 CLEAR EVENT LOG

Option to clear the current event log and erase all events logged so far.

5.6 CLEAR FAULTS

Option to clear all currently active faults and reset the panel status.

«
...
55
56
57
58
59
...
»

Содержание GR-750 Series








































































Отзывы:

Нет отзывов