GR-750x series
Control panel for addressable emergency
luminaires
Document number: 923750400_09_007
Date: 3/5/2022
Page: 46 of 71
[46]
5.3.1 CONFIGURE POINT
Points and all their parameters can be configured in this screen. To register a point or change its parameters,
after making all the desired changes, press the
“SAVE”
button. The
“DEFAULT”
button sets some
parameters a standard value.
To select the point you want to edit/register, first select the panel it belongs to from the
PANEL
dropdown list.
Then do the same with the
LOOP
dropdown list and type the desired point address in the
ADDRESS
field.
The configurable parameters of the points are:
•
Name
: The name of the point
•
Type
: The type of the point.
•
Zone
: The zone the point belongs to.
•
Model
: Model of the luminaire type point.
Figure 42
If the registered check box is green (like in the image above), it indicates that the point is registered.
IMPORTANT
No change is saved/takes effect until the “SAVE” button is pressed.