GR-750x series
Control panel for addressable emergency
luminaires
Document number: 923750400_09_007
Date: 3/5/2022
Page: 28 of 71
[28]
Figure 20 shows the application with the descriptions of the contents.
Figure 18
3.9 Printer paper replace
The paper type used by the printer is specified in Table 14. The procedure to replace the thermal paper roll is:
1. While pressing the open button (middle button with LED) on the thermal printer, pull its cover from the
top right or top left side.
2. Remove the previous paper roll (if any).
3. Unroll the new paper roll a few centimeters and place it inside the printer, as shown in Figure 19.
4. Close the cover and tear any excess paper by pulling it upwards left or right.
Figure 19
Table 14
– Thermal printer paper specifications
Printer paper specifications
Paper width
58 mm
Paper weight
from 55 to 70 g/m²
Maximum roll diameter
Ø 50mm