Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 49
E28.
Position and attach
Interior Vertical Door Flange
(1/2” x 2 1/2” x 70”)
on inside door frame
(left door from outside/right from the inside)
using
6 - 1 1/4” Screws.
Position on inside edge of
left door frame so Flange overlaps right door frame by about 3/4”.
Leave small gap
between Stop
and Flange.
E29.
To secure doors, you will need to install the
Interior Cane Bolt
to the Vertical Door Flange.
First slide bolt through the upper and lower brackets. Usually the upper bracket is positioned
between small nubs in the middle of the bolt. Use
3/4” Black Screws
to secure. Screw on angle
and make sure you attach to door frame. Pre-drill to prevent wood from cracking. Attach the holster
high enough up so the handle holds the bolt a few inches above the door stop.
Upper and
lower brackets.
Holster.
Bolt.
Important - Drill pilot holes
in Door Flange to prevent
wood from splitting.
