Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 24
C5.
With Rafter Section correctly aligned, secure rafters to walls using
90° Metal Brackets
. Start
with outside rafters and secure 2 - 90° Metal Brackets with
1 1/4” Screws
. Screw into Wall Extension
Framing at the rear and Wall Panel top framing at the front. Complete both sides.
90° Metal
Brackets
C6.
With outside rafters properly secured, completely secure remaining interior rafters using
6 - 3” Screws
. Screw into rafters from inside of Header on an angle at front of shed, and from inside
of Extension Wall Framing at rear of shed.
Front
