Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 27
Roof Seam.
D4.
With Roof Panels aligned, screw panels down to center rafters with
2 - 2 1/2” Screw
s in
Bottom
Row of Shingles Only (1 screw per panel).
Screw Bottom Row
of Shingles ONLY
for now. Screw on
angle away from
shingle edge to pre-
vent it from cracking.
Push tight together
.
D5.
To cover roof seam, slide one
Filler Shingle
(5 1/2” wide) up and underneath second shingle
row. Push or bang filler carefully with a hammer until evenly spaced and butt is even with other 1st row
of shingles.
Tip
Butt - thicker.
1st Shingle Row
2nd Shingle Row
D6.
Screw first filler shingle down to rafters using
1 - 2 1/2” Screw
per panel (2 in total). Screw
on slight angle and make sure to screw into rafter. Screw slightly above 3rd row of shingles
(exposure line).This way, the screw will get covered up when you install your 2nd Filler Shingle and
will prevent leaking.
Attach above
the exposure
line.
Exposure
Line.
3rd Shingle Row
