Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 38
D7.
Center
Rafter/Facia Nailing Plates
(2) (3/4” x 3/4” x 51”) onto outside of each plywood panel
flush on edge. Attach with
4 - 1 1/4” Screws
evenly spaced. The Rafter/Facia Nailing Plate
provides for a greater nailing surface later when you attach side facia. Locate
Top Siding Piece for
Angled Wall Extender (L/R)
. Position top siding on wall extender and align as shown above.
Attach with
3 - 1 1/2” Finishing Nails
to top wall framing. There are left/right top siding pieces. Use
rough surface side out.
D5.
Locate second
Small Plywood Roof Panel
. Position on rafters on rear of shed. Attach to
rafters with
9 - 1 1/4” Screws
as per
Step D3
.
D6.
Locate second
Large Plywood Roof Panel
. Position on rafters on rear of shed. Attach to
rafters with
12 - 1 1/4” Screws
as per
Step D2
.
