Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 13
B5.
With the corner wall attachment complete, position the second rear wall panel in place so
bottom 2x3 wall framing is sitting flush with outside floor framing. Wall siding should overhang floor by
approximately 3/4”. When positioned correctly, attach both wall panel studs together as per
Step B4
with
3 - 2 1/2” Screws
.
B6.
With Rear Wall Panel in place, position other side wall panel on floor as per
Step B4 & B5
.
Rear W
all Panel
Do Not Attach
Walls To Floor
until Step B22.
B4.
Butt both vertical wall studs of side and rear walls together and attach with
3 - 2 1/2” Screws
.
Screw at the bottom, middle and top of stud to secure properly. Have helper push wall framing
together while securing to ensure tight fit.
Rear Solid W
all
Side Solid W
all
Do Not Attach Walls To
Floor until B22.
