29
Operation of CASY TT
MAIN MENU – Select Setup
5.3 MAIN MENU – Select Setup
The
Select Setup
option opens the
SETUP SELECTION
screen. This screen enables you to select
one of 20 permanently stored setups for measuring capillary currently in use.
SETUP SELECTION
TT-2AB-9999 15.04.2009 10:15
Capillary: 150 µm
Setup No: 00 01 02 03 04 05 06 07 08 09
*
10 11 12 13 14 15 16 17 18 19
USE NEXT TO SELECT SETUP AND PRESS ENTER TO LOAD.
USE CANCEL TO LEAVE SCREEN.
The setups are numbered from 00 to 19. Each setup stores a complete set of parameters for the
selected measuring capillary. The setups already in use to store parameters are tagged with *. If no
setup is logged, the system works with the factory-default set of parameters.
Pressing the
NEXT
key selects a setup. You may select only those setups that have been logged and
tagged with *. Pressing and holding down the
NEXT
key enables you to move the selector mark
backwards. Pressing
ENTER
displays the selected setup.
Further details on the setup screen can be found under
Edit Setup
(see Chapter 5.4). Check wheth-
er the selected setup is matching your needs. Beside the measuring and evaluation parameters,
each setup has a distinct name which you can define and which is displayed in the top right-hand
corner of the setup screen.
Press
ENTER
again to load the setup displayed. If you do not wish to load the setup displayed, you
can return to Setup Selection by pressing
CANCEL
.
The setup parameters cannot be changed at this point. To edit a loaded setup, use the
Edit Setup
menu item described below (see Chapter 5.4).
