41
2. Release the ink cartridge using the lever.
3. Remove the cartridge.
4. Remove the new cartridge from its package and
peel off protective film.
If the new print head is of the single-use type
and you have replaced it because it ran out of
ink, the fax machine automatically recognises
the replacement and the display shows the
following message “NEW HEAD? 1 = ON,
0 = OFF”. Set the value 1.
If the new print head is of the single-use type
but you replaced it because the printing qual-
ity had deteriorated, follow the procedure “Print
head clearing and manual nozzle testing”,
reported farther on in the manual.
Once you close the cover, the fax machine will
automatically check the nozzles and perform
a print test (already described in “Installing the
print head”, under the “Installation” chapter).
REPLACING THE INK CARTRIDGE ...
1. Lift the print head compartment cover placing your
finger in the centre recess.
-7-39-49.p65
25/02/00, 9.50
41