14
Procedure
DISPLAY
1 Press the HOOK key
on your fax, to connect
to the line.
TYPE NUMBER
_
2 Dial the remote party
number on the numeric
keypad of your fax.
TYPE NUMBER
230087
7. If you want to use rapid dialling procedures
The fax machine also has rapid dial features: one-
touch dial and speed dialling. To use these fea-
tures, you must programme them as described in
the section "Programming one-touch dial and
speed dialling".
Once you have programmed them, it will be suf-
ficient to press one key (one-touch dial) or a key
followed by a two-digit numeric code (speed di-
alling) to dial a number (see "Transmitting with
one-touch dial" and "Transmitting with speed
dialling").
TRANSMITTING A DOCUMENT AT A PRESET
TIME (DELAYED TRANSMISSION)...
This feature allows you to avoid time zone problems, if
the remote party is thousands of miles away, and also
to avoid paying high rates by selecting times with less
traffic on the lines.
3. You want to call the remote party back without
dialling his/her number again
The fax machine always stores the last number di-
alled, which can simply be called up again by press-
ing the
(REDIAL) key twice. This feature is also
useful when the transmission does not take place
in spite of the automatic re-dialling attempts.
4. The remote party belongs to another area code
If the remote party belongs to another area code,
when using pulse dialling, it is better to insert a
pause (PAUSE key) between the international code,
the area code and the remote party number.The
display shows a “P” (pause).
5. The remote party is connected to a telephone
exchange accessed by a second tone detection
To enable the dialled number to detect a second
tone of the telephone exchange, press the FUNC-
TION (F) key while dialling the number. The display
will show ":" (this feature is enabled only in some
countries).
6. If you want to listen to the line tones while dial-
ling without picking up the phone (handsfree)
The fax machine is already enabled to listen both
to the connection signals and to the line tones. If
this is not the case, read the following procedure
or see "Hearing the connection tones" chapter
"For a more sophisticated use".
If this diagram is not enough:
è
è
read the following instructions:
-3-10-27.p65
25/02/00, 9.16
14
