26
Printing on request the transmission report,
the activity report and the broadcasting
report ...
Procedure
DISPLAY
1
Make sure the display
shows the initial waiting
mode with date and
time.
AUTOMATIC RX
02-03-99 10:48
2 Press the FUNCTION
key until the display
shows --->
PRINT OUT REPORT
3 Press the START key.
LAST TX REPORT
4 Press the </> keys to
show the other options
available: "LAST
BROAD. REP.",
"ACTIVITY REPORT'"
and "PRINT OUT:
EXIT". (In the example:
"ACTIVITY REPORT").
ACTIVITY REPORT
5 Press the START key
to confirm your choice.
The fax returns
automatically to the
initial waiting mode.
AUTOMATIC RX
02-03-99 10:48
Interpreting the reports ...
The reports contain the following information:
• Act. n.
Progressive number of transactions
(transmissions/receptions).
• Type
Type of operation:
- TX , TX ECM, TX POLL or TX
POLL ECM for transmission
- RX , RX ECM, RX POLL or RX
POLL ECM for reception.
• Doc. N.
Reference number of memorised
document. This number will be used
to associate the document with each
(single or broadcasting) transmission
carried out by the memory.
• Dialled
Number
Fax number of the remote party you
called.
• Received Id Number (and name if available) of the
remote party you called.
This corresponds to the number you
dialled, only if the remote party has set
his/her fax number correctly. Otherwise,
it may be different or even missing al-
together.
• Date/Time
Date and time of transaction.
• Duration
Duration of transaction (in minutes and
seconds).
• Pages
Total number of transmitted/received
pages.
• Result
Result of transaction:
- OK: if the transaction ended success-
fully
- XX ERROR CODE: if the transac-
tion was not executed/completed. For
the meanings of the error codes (see
"Error codes", chapter "Mainte-
nance").
7 Press the START key to
confirm your choice then
press the STOP key to
restore your fax to the
initial waiting mode.
AUTOMATIC RX
02-03-99 10:48
-3-10-27.p65
25/02/00, 9.16
26
