manualshive.com logo in svg

Olivetti OFX 3200, Инструкция по эксплуатации

Поделиться
Скачать
Olivetti OFX 3200 Скачать руководство пользователя страница 95

84

RECEPTION

AUTOMATIC RECEPTION

This reception method enables you to leave the fax unattended and receive any documents sent.

I

 

The facsimile machine is in standby. The display shows the message "AUTOMATIC RX".

1. When a call arrives, the facsimile machine prepares to receive a document (the machine

beeps and the TX/RX LED lights up). When LINE STATUS is pressed, the display shows the
information associated with the document (current page, transmission speed,  whether ECM
is enabled or not) and the sender's facsimile number (or name, if stored on the sender's
machine).

  RECEIVING        P.nn     14.4      E
  sender's number

2. At the end of the operation, the facsimile machine returns to standby (the machine beeps and

the TX/RX LED goes off).

MANUAL RECEPTION

This reception method requires the machine to be attended. When the telephone rings, lift the
handset and check whether the call is a voice or telephone call. If the handset emits modulated
tones, this means that someone wants to send a document. In this case, proceed as follows:

I

 

The facsimile machine is in standby. The display shows the message "MANUAL RX".

1. When you hear the fax tones, press START (the machine beeps and the TX/RX LED lights

up). When LINE STATUS is pressed, the display shows the information associated with the
document (current page, transmission speed,  whether the ECM function is enabled or not)
and the sender's fax number (or name, if stored on the sender's machine).

  RECEIVING        P.nn     14.4      E
  sender's number

2. Place the handset back on the hook. At the end of the operation, the facsimile machine returns

to standby (the machine beeps and the TX/RX LED goes off).

Содержание OFX 3200








































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды