18
Clearing a Secret Code Assigned to a Clerk Number
Proceed as follows if for any reason you wish to cancel a secret code
assigned to a specific clerk number.
1. Open the printer compartment and slide the control switch to the PRG
position.
2. Type the
[Clerk number (1 to 8)]
associated to the three-digit secret
code that you wish to cancel.
3. Press the
[Clerk]
key to cancel the code.
4. Slide the control switch to your operating mode and then close the
printer compartment cover.
Date and Time
Set the date to print the current date at the top of each receipt, journal
record or management report. The date will print in the format in which it
was defined.
Set the time to print the current time at the bottom of the receipt. The
time prints in the hour:minutes format and by default assumes the 24-hour
format. You can display the time by pressing the
[Qty/Time]
key when
the cash register is in the R1 or R2 mode.
The date and time change automatically as long as the cash register is
plugged into the wall outlet or the battery back-up system remains active.
Setting the Date
Proceed as follows to set the current date:
1. Slide the control switch to the PRG position.
2. Type the
[numeric keys]
representing the current date. Remember to
use the DDMMYY or MMDDYY format. Single digit numbers for
months and days must be preceded by a zero (0).
3. Press the
[ST/#/NS]
key to store the date.
4. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example:
Set a date of March 8, 2003.
Type/Press:
[080303] + [ST/#/NS]
Setting the Time
Proceed as follows to set the correct time in the hour:minutes format:
1. Slide the control switch to the PRG position.
2. Type the
[current time]
using the HH:MM format according to
international, or military time (24-hour clock format). To correctly
enter this time, simply add 12 to all hours in the PM. For example, to
set the time to 9:00 AM, type
[0900];
to set the time to 2:15 PM, type
[1415].
3. Press the
[Qty/Time]
key to store the entered time.
4. Program another feature or exit program mode by sliding the control
switch to the OFF position.
Example:
Set the time at 3:30 PM.
Type/Press:
[1530] + [Qty/Time]
Percent Discount (-%)
Setting this option automatically calculates the preset rate each time the
[-%] key is pressed. The percentage rate can be discounted from an
individual item or from a sales transaction subtotal.
Содержание ECR 5000
