Olivetti d-COPIA 3013MF Скачать руководство пользователя страница 389

Страница: 389 / 483

9-3

Maintenance

Cleaning the Machine

To avoid print quality problems, the interior of the machine must be cleaned with every toner container replacement.

Open the front cover.

Lift the developer unit together with the toner container
out of the machine.

Remove the drum unit from the machine by holding the
green levers with both hands.

NOTE:

The drum unit is sensitive to light. Never expose the

drum unit to light for more than five minutes.

Place the drum unit flat on a clean, level surface.

IMPORTANT:

Do not place the drum unit on end.

Use a clean, lint free cloth to clean dust and dirt away
from the metal registration roller.

IMPORTANT:

Take care not to touch the transfer roller

(black) during cleaning.

Содержание d-COPIA 3013MF




































































































































































































































































































































































































































































































Результаты поиска

Содержание d-COPIA 3013MF

Отзывы:

Бренды по названию

Популярные бренды

Olivetti d-COPIA 3013MF, Руководство по эксплуатации

Результаты поиска

Содержание d-COPIA 3013MF

Отзывы:

Бренды по названию

Популярные бренды