Olivetti d-COPIA 3013MF Скачать руководство пользователя

Страница: 338 / 483

8-130

Default Setting (System Menu)

Press the

key. This displays the list of destinations

registered in the Address Book.

NOTE:

If 100 members have already been registered in the

group, the screen will display

Registered numbers

exceeded.

and return to the Group Member.

Press the





key to select the destination you want

to add to the group.

Press the

key. This displays the sending address

registered to the selected destination.

Press the





key to select the sending address.

Press the

key. The selected destination is added to

the group and the screen returns to Group Member.

NOTE:

If you select an individual destination that has

already been registered to the group, the screen will display

This address is already registered.

and return to the screen

of step 7.

Deleting member from group

To delete a member registered to the group, follow the procedure below.

While Group Member is displayed, press [Edit] (the

Right Select

key). This displays the list of destinations

registered to the group.

Press the





key to select the destination you want

to delete.

Press [Menu] (the

Right Select

key). The group editing

menu appears.

Press the





key to select [Delete].

Contacts:

*********************

Maury

Morgan

[ Menu

]

Fiala

Sally:

0667643277

sally@###########.

Ntid7004

[ Menu

]

Group Member:

*********************

Morgan

[ Menu

]

Sally

Menu:

Detail

*********************

Add Member

Delete

Содержание d-COPIA 3013MF




































































































































































































































































































































































































































































































Результаты поиска

Содержание d-COPIA 3013MF

Отзывы:

Похожие инструкции для d-COPIA 3013MF

Бренды по названию

Популярные бренды

Olivetti d-COPIA 3013MF, Руководство по эксплуатации

Результаты поиска

Содержание d-COPIA 3013MF

Отзывы:

Похожие инструкции для d-COPIA 3013MF

Бренды по названию

Популярные бренды