Olivetti CopyLab 200, Руководство пользователя

Страница: 43 / 53

Troubleshooting 43
Colour Intensity setting is inadequate.
Press the Colour Intensity button to select better colour intensity.
Print head needs replacing. Check the print head by printing the test page. If necessary, replace the
print head.
Remember to align the print head whenever you replace it.
Glass and/or under-side of copier cover
is/are dirty.
Clean the glass and/or the underside of the copier cover with a soft,
damp cloth.
Poor quality original. Some types of originals, such as newsprint or newspaper photos do not
copy well.
Repetitive patterns are
visible on the copy
Document being copied is already a
copy, not an original. When material is reprinted, repetitive patterns may be visible on the
copy. Try to eliminate the patterns by reducing the copy size or by
placing the document at an angle on the glass.
Incorrect Paper Type setting Make sure that the paper type indicated on the LCD is the same as the
type of paper actually loaded in your multifunctional copier.
The print head jets may be clogged Run the Clean function: if the copy quality does not improve, remove and
clean the print head manually, then print a test page.
If necessary, replace the print head.
Remember to align the print head whenever you replace it.
Paper wrinkled and very wet
Paper Type setting does not
correspond to the media loaded in the
input tray (e.g. Paper Type is
Transparent but Plain paper is loaded
in the input tray.)
Change the Paper Type setting OR load the input tray with paper
indicated by the current setting.
Page has very dark colours Press the Colour Intensity button on the operator panel to lighten the
copy.
White lines on the copy The original has been folded. Countercrease the fold or place a book on top of the original to minimise
the fold.
Copied image seems to have
shifted or jumped
Copier cover was lifted or uneven
pressure was applied to it during
copying.
Copy again, and do not to lift or press down on the copier cover while the
copy is being made.
Copies streaked, smeared, or with
horizontal lines
Copying on the wrong side of the paper Make sure to put the paper/print media is print-side down.
Incorrect image placement on page
or edges cut off
Original not positioned correctly on
copier glass.
Make sure the original is aligned both horizontally and vertically with the
scale at the edge of the document glass.
Wrong enlargement ratio The enlargement ratio currently selected is making the copy too large or
too small. Correct the setting.
Wrong paper size The paper size setting currently selected does not correspond to that
loaded in the input tray. Load the correct paper size OR change the
setting.
Copies are crooked Original not placed correctly on the
copier glass.
Align the original correctly against the scale at the edge of the document
glass.
Lateral guide on the ASF is not position
correctly against the paper/media
edges. Position the guides correctly.