Olivetti CopyLab 200, Руководство пользователя

Страница: 11 / 53

The Print Head 11
Alignment from the Print Care Menu
1.
Press on the operator panel until PRINT CARE MENU appears on the LCD.
2.
Press .
3.
Press until the PRINT HEAD ALIGNMENT message appears.
4.
Press .
5.
The LCD shows the ALIGNMENT PLEASE WAIT message, and then exits from the alignment procedure as
described in the “
Automatic Alignment Following Insertion/Replacement of the Print Head ” section.
If You Have Trouble Installing the Print Head:
•
Make sure that the print carriage is in the print head loading position (on the right-hand side of the machine, with
the possibility of access to the release lever).
•
Check that the print head compartment is clean and free of foreign bodies.
•
Make sure that the print head is correctly inserted (print head contacts against the print carriage contacts).
•
NEVER force the print head into its compartment. If you have trouble inserting the print head, remove it
completely and repeat the installation procedure.