21
ENGLISH
Changing the Cash Register's Standard Settings
Proceed as follows if you wish to change any of the standard machine
settings indicated in the previous table:
1. Slide the control switch to the PRG position.
2. Type the [number] of the machine condition (1-10 as indicated in
the table) that you wish to alter.
3. Type the [number] of the required setting.
4. Press the [RA/ ] key.
5. Program another feature or exit the program mode by sliding the
control switch to the OFF position.
Example: Program the cash register to work with a Euro base currency.
Type/Press:
[10] + [1] + [RA/ ]
Programming a Manager Password
You can define a manager password to prevent unauthorized access to
the machine's programming mode (PRG) and Z mode. Since the
management reports taken in the Z mode reset transaction totals to
zero, a management password prevents the accidental resetting of these
totals by unauthorized personnel.
Defining the PRG and Z Mode Manager Password
Proceed as follows to define a manager password that grants access to
the PRG and Z modes:
1. Slide the control switch to the PRG position.
2. Type your 4-digit manager password and then press the [Charge]
key. The password entered is displayed and printed.
NOTE: If you define a manager password of 0000, the password
security protection feature will not work.
Example: Define manager password 9876 for the PRG and Z modes.
Type/Press:
[9876] + [Charge]
NOTE: If you set a PRG and Z mode manager password, you will not
be able to alter your program or print your management reports
until the correct password is entered. If you attempt to make
changes to the machine's configuration or to print a Z manage-
ment report, the message "SEC Code" is displayed prompting
you to enter the password.
Clearing the PRG and Z Mode Manager Password
Proceed as follows to clear the manager password that grants access
to the PRG and Z modes:
1. Slide the control switch to the PRG position.
2. Type [0] + [0] + [0] + [0] and press the [Charge] key.
