20
Programming the Euro Exchange Rate
Euro exchange rate programming consists of firstly defining the
position of the decimal point of the Euro exchange rate (0-8 digits after
the decimal point), the position for the decimal point of the changed
amount which is also printed on the sales receipt (0-3 digits after the
decimal point), and then the actual current exchange rate (up to 6
digits). To provide you with the Euro value, the cash register divides
the local currency value by the exchange rate defined.
Proceed as follows to program or update the exchange rate of your
local currency into Euro:
1. Slide the control switch to the PRG position.
2. Type the [decimal point position] of the exchange rate (0-8 digits
after the decimal point).
3. Type the [decimal point position] of the converted amount (0-3
digits after the decimal point).
4. Type the [exchange rate] using up to six digits without specifying
any decimal point.
5. Press the [Sub Total] key to store the exchange rate.
Example: Program an exchange rate of £ 0.676 to the Euro.
Type/Press:
[3] + [2] + [000676] + [Sub Total]
Programming System Options
Your cash register's system options programming feature includes 10
options for the operation of the cash register. Each of the functions
described in this section is already set upon delivery of the cash register
to meet the most frequent requirements. The cash register's factory
default settings, which you can reprogram at any time, are indicated in
bold print in the table below.
Machine
Settings
Condition
1
0 = No digit after the decimal point
1 = 1 digit after the decimal point
2 = 2 digits after the decimal point
3 = 3 digits after the decimal point
2
N/A
3
0 = Preset USA tax mode
1 = Preset Canadian tax mode
2 = Preset VAT mode
4
0 = Setting of non-taxable limit without GST TAX for
Canadian tax mode
1 = Setting of non-taxable limit with GST TAX for Canadian
tax mode
5
0 = Non-selection of the TAX ON TAX Canadian taxation
system
1 = Selection of the TAX ON TAX Canadian taxation system
6
N/A
7
0 = Euro convert function not allowed
1 = Euro convert function allowed
8
0 = Zero price entry not allowed
1 = Zero price entry allowed
9
0 = Print conversion tender only
1 = Print all tender
10
0 = Local base currency
1 = Euro base currency
