Olivetti 3D IoT, Руководство пользователя, Страница: 54 / 77

4-2 User Manual 596806-02
ACCESS POINT MODE
When the Wi-Fi module is powered on it activates Access Point mode.
In the lower half of the display, the
“name” of the Wi-Fi network generated by the Access Point is shown.
To connect a device (PC, Smartphone, etc.) to the Wi-Fi network, from the list of Wi-Fi networks shown on
your device select the name of the Wi-Fi network generated by the Access Point. If your browser does not
load the printer startup page automatically, enter the address 192.168.1.1 directly into the browser search
field.
Unless differently set,
the network logon password is the printer Serial Number . This can be found in
the
“Info” submenu (see previous section), its position indicated by the arrow in the Figure here:
Figure 4-3 Info Submenu – Wi-Fi Password (Serial Number)
If the browser doesn
’t show automatically the printer’s home page, digit in the browser address bar the
address olivetti3dportal.net or 192.168.1.1 .
Once the connection is established, from the browser of your device you can select:

Wi-Fi: to configure/modify the Wi-Fi connection parameters

Moves: printer functionalities and commands, including:
o
Verify and modify printing parameters
o
Start printing

SD: reading and writing data to SD memory, including:
o
Upload a print file (.GCODE) from the device to the SD memory
o
Remove a print file (.GCODE) from the SD memory