Olivetti 3D IoT, Руководство пользователя, Страница: 24 / 77

2-4 User Manual 596806-02
3. The Touch Screen displays the Bed Levelling message while the extruder assembly takes up the Home
position.
Figure 2-5 Bed Levelling Display
4. Touch the display at bottom left (Position 1 in Figure 2-5). The extruder assembly moves to this first
adjustment point.
5. Try to pass a normal sheet of paper, folded in two, between the extruder nozzle and the tempered glass
table (Figure 2-6).
If the paper moves freely between the nozzle and the glass, you need to concentrate on the self-locking nut
(Figure 2-7), turning it a few degrees in the clockwise direction to bring the table nearer to the nozzle
eliminating any space between the glass, the paper and the nozzle.
If the opposite is true, i.e. the nozzle is too near the glass (you cannot insert the sheet), then you must turn
the nut in the opposite direction (i.e. anticlockwise) so as to set the correct amount of space between the
nozzle and the printing table.
Figure 2-6 Use a sheet of paper to check the distance between the extruder nozzle and the tempered glass
1
2
3
4
5